Search
Xhorse VVDI BIM Tool BIMTool Pro Updated Version of VVDI BMW Gift 20pcs Super Chip
SKU
EC406
Special Price
$999.00
was
$1,060.00
In stock
Xhorse VVDI BIMTool Pro Support BMW E-sys and Rheingold Diagnostic System. Able to replace the specialized devices. (connect via network cable), Support directly read ISN data without disassembling the ECU (N13 / N20 / N55 / N63)
Categories: Default Category, Brands, XHORSE, VVDI BMW, VVDI Key Programmer, for BMW
Xhorse VVDI BIM Tool Pro Enhanced Edition
VVDI BIMTool Pro New Features
- Add ethernet port, Support 10/100M programming via Ethernet.
- Support WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrade
- Support DoIP Vehicle/Module Programming
- Support BMW ECU programming (NBT/CIC) (connect via network cable)
- Greatly speed up the F/G Chassis programming (connect via network cable)
- Support BMW E-sys and Rheingold Diagnostic System. Able to replace the specialized devices. (connect via network cable)
- Support directly read ISN data without disassembling the ECU (N13/N20/N55/N63)
VVDI BIM TOOL Pro Using Notice
1. Notice Do not use the Internet Port and USB Port at the same time:
For FEM/BDC Program using the USB Port connect is ok.
For Others Program you can connect the Internet Port .
2. When connect the Port with PC, first it display"Booting", after about 20 seconds it will display"BMW"
then the connect is ok.
Xhorse VVDI BIM PRO VS VVDI BMW VS VVDI2 BMW:
Xhorse VVDIBIM PRO vs VVDI BMW
VVDI BIMTOOL Pro Tool Faq:
A:I received the package but Xhorse VVDI BIMTool Pro doesn’t work. There was no connection with the car (either via CAN or KLINE bus). I updated the device to the newest software and firmware. any iead?
Q:you should short the component in the following printed circuit board with a zero-ohm resistor below picture
1. Notice Do not use the Internet Port and USB Port at the same time:
For FEM/BDC Program using the USB Port connect is ok.
For Others Program you can connect the Internet Port .
2. When connect the Port with PC, first it display"Booting", after about 20 seconds it will display"BMW"
then the connect is ok.
Xhorse VVDI BIM PRO VS VVDI BMW VS VVDI2 BMW:
| VVDI BIM PRO | VVDI BMW | VVDI2 BMW | |
| Color | Blue | Blue | Yellow |
| Functions | Locksmith,programming,coding | Locksmith,programming,coding | Locksmith |
| Update | Software Online for free Firmware use "update kit" update for free |
Software Online for free Firmware use "update kit" update for free |
Software Online for free Firmware use "update kit" update for free |
| Support System | EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM/ BDC system | EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM / BDC system | EWS to CAS (1, 2, 3, 3++ 4, 4+) |
| Programming Funtion | Support Can and DOIP | Support Can | / |
Xhorse VVDIBIM PRO vs VVDI BMW
| Item | VVDI BIMTOOL Pro | VVDI BMW TOOL |
| Remark | In stock | Out of stock |
| Language | Chinese, English, Italian, Spanish, German, Hungarian, Polish | Chinese, English, Italian, Spanish, German, Hungarian, Polish |
| Program E/F chassis | Yes | Yes |
| Code E/F chassis | Yes | Yes |
| Learn OBD key |
Yes for CAS1 / CAS2 / CAS3 / CAS3+ / CAS3+ ISTAP / CAS4 / CAS4+ |
Yes for CAS1 CAS2 CAS3 CAS3+ CAS3+ISTAP CAS4 CAS4+ |
| File make key |
Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc. |
Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc. |
| Gnerate key for FEM/BDC system | Yes | Yes |
| Correct mileage |
Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM / BDC system |
Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM/BDC system |
| Read EEPROM & synchronous code data |
Yes for CAS1 CAS2 CAS3 CAS3+ |
Yes For CAS1 CAS2 CAS3 CAS3+ |
| Get ECU ISN | Yes | Yes |
| Support synchronous ECU and CAS, synchronous ELV and CAS | Yes | Yes |
| Reset 8HP gearbox in F chassis | Yes | Yes |
| Exchange ECU and CAS | Yes | Yes |
| Add ethernet port | Yes, support 10/100M programming via Ethernet | No |
| WiFi | Yes, support WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrade | No |
| DoIP Vehicle/Module Programming | Yes | No |
| BMW ECU programming (NBT/CIC) | Yes, connect via network cable | No |
| Speed up the F/G Chassis programming | Yes, connect via network cable | No |
| BMW E-sys and Rheingold Diagnostic System | Yes, able to replace the specialized devices (connect via network cable) | No |
| Read N13/N20/N55/N63 ISN data without disassembling | Yes | No |
VVDI BIMTOOL Pro Tool Faq:
A:I received the package but Xhorse VVDI BIMTool Pro doesn’t work. There was no connection with the car (either via CAN or KLINE bus). I updated the device to the newest software and firmware. any iead?
Q:you should short the component in the following printed circuit board with a zero-ohm resistor below picture