Opel+ For Fiat IMMO Tool Immobilizer V3.50 can used to read pin code from engine ecu of opel, it can be also used to program ECU o immo or program immo to ecu.
Opel+ For Fiat IMMO Tool Immobilizer V3.50
1. Language: English
2. Version: V3.5
3. Can't be Updated
Software language: English.
1. Opel cars with Immo1,2 and Immo3 (CAN bus) supported up to year2009 ,via OBD2
2. Programming of new keys for For Fiat cars by OBD2: Palio, Siena, Strada, Uno with immobiliser inside the dashboard on CAN bus from year 2008+! Pin code and pre-programmed with TM Pro2 module #100 transponders are required!Pin code reading from engine ecu of some Opel cars with Immo2. Program/erase keys of immo1,2 and 3.Pin code is required! Clear engine ecu, adaptation of virgin ecu to Immo2. Clear immo2, immo3, adaptation of virgin Immo2 to engine ecu.
List of supported cars:
PIN code read from Opel cars with Delco Multec engine ecu
HSFI 2.0-2.5 - Model - Year - Engine
Vectra B 2000-2001 Y16XE,Z16XE
Astra G 2001-2005 Z14XE,Z16XE,Z16SE
Corsa C 2001-2004 Z14XE
Meriva 2003-2004 Z16SE
Astra,Corsa with Delco 1.7 DTI diesel 1999-2004
Delco "F" Old Multec Model Year Engine
Astra,Vectra B 1998-2000 X16SZR
How to read pin code from engine ECU
This procedure works with Opel Immo2 cars ONLY!
|Technical Documents||There is no document availble.|